Gehl RS8-42 Mark74
Performance
The model RS8-42 Mark74 is built with high quality components, which provide the performance to get the job done.
- Boom tip lift hook option is now available as a factory-installed option or field installed option.
- Proven welded box-section telescopic boom design maximizes material lift and placement.
- Cylinder design provides one of the fastest cycle times in the industry.
- Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain.
- Internal wet disc brakes provide excellent brakingand long life.
- Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity.
Operator's Cabin
The RS8-42 Mark74 Telescopic Handler features spacious, durable operator stations to maximize comfort and productivity.
- 44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment.
- ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional.
- Virtually 360-degree visibility increases safety and operating accuracy.
- Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional.
- Side and rear glass is standard equipment.
Handling
Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
- in 4-wheel steer, the machine has a 13' 8" turning radius for machine positioning on tight job sites..
| Turning Radius (m) | 13'8" (4.2) |
Engine
The RS8-42 Mark74 Telescopic Handlers provides the power to get work done effectively and efficiently.
- Dana three-speed power-shift transmission is easy to operate.
- Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.
| Manufacturer | Cummins |
| Model | QSF 3.8 Tier IV |
| Power (kW) | 74 hp (53.6) |
| Maximum Travel Speed (km/hr) | 15 mph (25) |
| Rated Speed | 2,500 rpm |
Hydraulics
The model RS8-42 Mark74 has outstanding hydraulic system and control performance.
- Dual-function, pilot-assisted joystick is standard equipment.
- Optional tri-function, pilot-assisted joystick allows the operator to set fork tilt and auxiliary function speeds.
- Auto-leveling feature keeps loads level when raising/lowering the boom.
| Pump Type | Gear |
| Total Capacity (L/min) | 41.5 gpm (157) |
| System Pressure (bar) | 3,000 psi (207) |
| Hydraulic Reservoir Capacity (L) | 45 gal. (170) |
Attachments
There is a tool for every job, and the RS8-42 MArk74 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.
| A | Carriages – Masonry, framing and standard carriages available in different widths. |
| B | Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide. |
| C | Fork Shift - 50" (1270 mm) wide. |
| D | Personnel Work Platforms - 180° swing platform and 48” x 50” x 114” (1219 mm x 1270 mm x 2895 mm) platform. |
| E | Swing Carriage – 90° and 180° swing. |
| F | Log and Pipe Grapple. |
| G | Jib Boom - 5' (1.5 m) with winch and 60' (18.3 m) cable. |
| H | Truss Boom - 15' (4.5 m) with optional winch. |
Boom Tip Lift Hook
- This factory-installed option provides a secure lifting point for transporting suspended loads without the use of an additional attachment.
- The lift capacity remains the same as a standard carriage, while the quick attachment point increases versatility and reduces downtime.
Serviceability
Plenty of access points and over-sized covers make service and maintenance on the RS8-42 Mark74 quick and efficient.
- Over-sized front cover provides easy access to the hydraulic reservoir and hydraulic pressure ports for service and testing.
- Side-mounted fuel tank with battery access and an additional storage compartment.
- Lockable rear-side covers located on both sides of the machine slide out of the way to expose the engine for service.
- Shorter hoses from main valve to boom provide compact hose routing, enhancing serviceability.
