BC1000XL Tier 4

2025 Vermeer BC1000XL Tier 4 Final Brush Chipper

Enhanced with the modern day operator in mind, the BC1000XL is available with either a Tier 4 Final 49-hp or 74-hp (36.4-kW or 55-kW) engine that meets all the latest emission regulations. When transporting the machine, expect smooth towing thanks to the rubber-torsion suspension.

Dimensions
Tongue Weight - Engine Option One	600 lbs (272.2 kg)
Length - Table Down, Tongue Extended	208 in (528.3 cm)
Weight - Engine Option One	4995 lbs (2265.7 kg)
Height	101 in (256.5 cm)
Width	66.5 in (168.9 cm)
Tongue Weight - Engine Option Two	600 lbs (272.2 kg)
Length - Feed Table Up, Tongue In	160 in (406.4 cm)
Weight - Engine Option Two	4995 lbs (2265.7 kg)

Operational
Number of Knives	2
Bedknife - Number of Useable Edges	4
Feed Roller Dimension	20" x 17" (50.8 cm x 43.2 cm)
Motor Manufacturer	White
Bedknife Size	3.5" x 17.3" (8.9 cm x 43.8 cm)
Number of Feed Roller Motors	1
Feed Roller Orientation	Horizontal
Weight With Shaft	460 lbs (208.7 kg)
Number of Feed Rollers	1
Thickness	.4 in (1 cm)
Diameter	20 in (50.8 cm)
Pinch Point - Distance to End of Feed Table	66.5 in (168.9 cm)
Fixture Method	Weld-on
Motor Displacement	28.3
Infeed Hopper Height	12 in (30.5 cm)
Number of Paddles	5
Feed Roller Minimum Distance to Drum	1 in (2.5 cm)
Weight of Feed Roller	400 lbs (181.4 kg)
Infeed Table Length	32 in (81.3 cm)
Knife Size	0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm)
Infeed Throat Capacity	12" H x17" W (30.5 cm H x 43.2 cm W)
Feed Speed	105 ft/min
Infeed Table Width	52 in (132.1 cm)
Safety Lock - Number of Positions	2
Speed	2050 rpm
Replaceable Threaded Knife Block	Yes
Number of Bolts/Knife	4
Infeed Table Material Thickness	.2 in (.5 cm)
Distance from Feed Table to Ground	26 in (66 cm)
Feed Roller Clamp Load	350 lbs (158.8 kg)
Useable Edges	2
Four Position Feed Control Bar	Standard
Bottom Feed Stop Bar	Standard
Green Hold to Run Button	Standard
Filtration Method	10 micron return; 100 micron suction
Directional Control	Yes
System relief pressure	2500 psi (172.4 bar)
Tank capacity	7 gal (26.5 L)
Recommended Oil Type	Vermeer VMF
Width	20 in (50.8 cm)
System Type	Tandem center
Fender Description	Bolt-on-steel
Hitch Type	Pintle
Frame Description	7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness
Tongue Extension	Extendable 24" (61 cm) @ 12" (30.5 cm) increments
Tongue Description	2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm)
Manufacturer - Option Two	Dexter
Capacity - Option Two	7000 lb (3175.2 kg)
Axle/Suspension - Option Two	Torsion
Tires - Option One	ST235/80/R16 Load Range E
Axle/Suspension	Torsion
Wheels - Option Two	16" x 6" (40.6 cm x 15.2 cm)
Tires - Option Two	ST235/80R16 Load Range E
Capacity - Option One	5200 lb (2358.7 kg)
Manufacturer - Option One	Dexter
Type - Option One	Rubber torsional
Wheels - Option One	16" (40.6 cm)
Type - Option Two	Rubber torsional
Pump Flow at Maximum RPM	2.7 gpm (10.2 L/min)
Rotation Type	Rotation handle with pin lock
Rotational Lock	Yes
Chute Rotation Angle	270 deg
Chute Height	101 in (256.5 cm)
Trailer Light Type	LED
Brake Type	Standard electric or optional hydraulic
Reset Method	Green hold-to-run button
Reduced Sensitivity	12 deg
Normal Sensitivity	22 deg
Actuation Force (BFSB)	34 lbs (15.4 kg)
Actuation Force	34 lbs (15.4 kg)
Bottom Feed Stop Bar Diameter	2 in (5.1 cm)
Positions	4: E-stop, forward, neutral and reverse
Bottom Feed Stop Bar Material Thickness	11 GA
Bedknife Thickness	1 in (2.5 cm)
Bedknife Material	1018
Material Capacity	12 in (30.5 cm)
Knife Thickness	.6 in (1.6 cm)
Material	A8 chipper steel