Vermeer BC1000XL
2025 Vermeer BC1000XL Gas Brush Chipper
Complete with a 72.4-hp (54-kW) Deutz 2.9 L4 gas engine, the chipper is powered by a dependable electronic fuel injection (EFI) system. The BC1000XL also features a direct electronic pressure regulator that allows for greater control of fuel delivery, fuel economy and optimum combustion. This chipper comes standard with the Vermeer patented EcoIdle™ engine control system and patented SmartFeed technology and has a 12-in (30.5-cm) cutting capacity.
| Dimensions | |
|---|---|
| Height | 101 in (256.5 cm) |
| Sound Power | 119 dB(A) |
| Tongue Weight - Engine Option One | 520 lbs (235.9 kg) |
| Weight - Engine Option One | 4680 lbs (2122.8 kg) |
| Length - Table Down, Tongue Extended | 208 in (528.3 cm) |
| Length - Feed Table Up, Tongue In | 160 in (406.4 cm) |
| Width | 66.5 in (168.9 cm) |
| Operational | |
|---|---|
| Actuation Force | 34 lbs (15.4 kg) |
| Positions | 4: E-stop, forward, neutral, and reverse |
| Reset Method | Green hold-to-run button |
| Reduced Sensitivity | 12 deg |
| Normal Sensitivity | 22 deg |
| Actuation Force (BFSB) | 34 lbs (15.4 kg) |
| Bottom Feed Stop Bar Material Thickness | 11 GA |
| Bottom Feed Stop Bar Diameter | 2 in (5.1 cm) |
| Green Hold to Run Button | Standard |
| Four Position Feed Control Bar | Standard |
| Bottom Feed Stop Bar | Standard |
| Diameter | 20 in (50.8 cm) |
| Number of Knives | 2 |
| Bedknife Material | 1018 |
| Bedknife Thickness | 1 in (2.5 cm) |
| Material | A8 chipper steel |
| Knife Thickness | .6 in (1.6 cm) |
| Material Capacity | 12 in (30.5 cm) |
| Bedknife - Number of Useable Edges | 4 |
| Bedknife Size | 3.5 " x 17.3 " (8.9 cm x 43.8 cm) |
| Air Flow | 580 cfm |
| Fixture Method | Weld-on |
| Number of Paddles | 5 |
| Replaceable Threaded Knife Block | Yes |
| Number of Bolts/Knife | 4 |
| Knife Size | 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm) |
| Useable Edges | 2 |
| Safety Lock - Number of Positions | 2 |
| Weight With Shaft | 460 lbs (208.7 kg) |
| Speed | 2220 rpm |
| Thickness | 20 in (50.8 cm) |
| Hitch Type | Pintle |
| Trailer Light Type | LED |
| Brake Type | Standard electric or optional hydraulic |
| Wheels - Option Two | 16 " x 6 " (40.6 cm x 15.2 cm) |
| Tires - Option Two | ST235/80R16 Load Range E |
| Capacity - Option Two | 7000 lb (3175.2 kg) |
| Manufacturer - Option Two | Dexter |
| Type - Option Two | Rubber torsional |
| Axle/Suspension - Option Two | Torsion |
| Wheels - Option One | 16 " x 6 " (40.6 cm x 15.2 cm) |
| Tires - Option One | ST235/80/R16 Load Range E |
| Capacity - Option One | 5200 lb (2358.7 kg) |
| Manufacturer - Option One | Dexter |
| Type - Option One | Rubber torsional |
| Axle/Suspension | Torsion |
| Fender Description | Bolt-on steel |
| Tongue Extension | Extendable 24" (61 cm) at 12" (30.5 cm) increments |
| Tongue Description | 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) |
| Frame Description | 7" (17.8 cm) Z channel; .25" (0.6 cm) thickness |
| Tank capacity | 7 gal (26.5 L) |
| System relief pressure | 2500 psi (172.4 bar) |
| System Type | Open center |
| Recommended Oil Type | Vermeer VMF |
| Directional Control | Yes |
| Filtration Method | 10 micron return; 100 micron suction |
| Pump Flow at Maximum RPM | 3 gpm (11.4 L/min) |
| Infeed Table Material Thickness | .2 in (.5 cm) |
| Distance from Feed Table to Ground | 26 in (66 cm) |
| Pinch Point - Distance to End of Feed Table | 66.5 in (168.9 cm) |
| Infeed Throat Capacity | 12 " x 17.5 " (30.5 cm x 43.2 cm) |
| Infeed Hopper Height | 12 in (30.5 cm) |
| Infeed Table Length | 32 in (81.3 cm) |
| Infeed Table Width | 52 in (132.1 cm) |
| Feed Speed | 118 ft/min |
| Motor Manufacturer | White |
| Motor Displacement | 28.3 |
| Number of Feed Roller Motors | 1 |
| Weight of Feed Roller | 400 lbs (181.4 kg) |
| Feed Roller Dimension | 20 " x 17 " (50.8 cm x 43.2 cm) |
| Feed Roller Minimum Distance to Drum | 1 in (2.5 cm) |
| Feed Roller Clamp Load | 350 lbs (158.8 kg) |
| Number of Feed Rollers | 1 |
| Feed Roller Orientation | Horizontal |
| Rotational Lock | Yes |
| Rotation Type | Manual rotate with pin lock |
| Chute Rotation Angle | 270 deg |
| Chute Height | 101 in (256.5 cm) |
IN STOCK ITEMS
Vermeer BC1000XL 3483
12” Capacity Drum Style Brush Chipper, 12 X 17” Opening / DEUTZ G2.9 PETROL 72Hp Gas Engine / EcoIdle Engine Control System - Automatically Lowers Engine RPM when Material is not being Chipped / Air Cleaner 2 Stage Dry with Safety Element / 20 Gallon Fuel Tank / Live Hydraulics with 7 Gallon Hydraulic Tank / 5200LBS (DOM) AXLE, 16" TIRES, TONGUE, HITCH includes 5200 lbs Torflex axle With Electric Breaks / Clutchless PTO with Belt Tensioner / 20” Diameter Feed Wheel. 17” Wide / 2 Double Sided Cutter Knives / Chute Rotation Angle 270 Degrees / Upper and Lower Feed Stop Bar for Safety.
View Item