Hangcha CPDS20-XCD6-SI

XC Series 3-W Electric Forklift Truck
Covering models with a tonnage of 1.3t, 1.5t, 1.6t, 1.8t and 2.0t respectively,
the new XC series three-point new energy electric forklifts are HANGCHA’s
dedicated-purpose battery forklifts subsequent to the XC series four-point
dedicated-purpose battery forklifts.
Equipped with the dedicated lithium battery cells and modules for the
C series forklifts, which are developed jointly by HANGCHA and CATL, the
truck has the features of high lifting speed, high driving speed, excellent
ergonomic design, easy operation and high safety. 

Excellent ergonomic design
 The truck has a large operation space more than 50%
larger than that of the traditional three-point electric truck.
The enlarged brake pedal and appropriate regenerative
braking function can effectively reduce the driver’s fatigue.
For the optional integrated fingertip operating system, the
combined operation armrest integrates the emergency
shut-off, horn and quadruple thumb switches, etc., is
electrically controlled through the CAN bus, and is highly
reliable.

Easy operations and maintenance
 With the fully sealed hood and side plates, all major components
including the electrically controlled components, motor,
electrical components, etc. are sealed from dust and water.
Vulnerable parts and key parts are arranged reasonably to
facilitate maintenance and repair.
The hood (with a self-locking gas spring) can be opened at a
large angle facilitating the maintenance and replacement of
the battery.

Advancement
The high-frequency MOSFET integrated controller ensures
smooth and accurate driving and lifting control, and has
excellent speed regulation performance, good performance
of electronic control matching the motor, functions of
regenerative braking, reverse braking and anti-sliding on
ramps, etc., and high safety and reliability.
The ultra-high power AC drive motor has a bridge structure.
An ultra-high power AC oil pump motor is used. The system
has high efficiency, complete protection functions, built-in
speed and temperature sensors, and greatly improved
reliability and life.
The noise can be as low as 73dBA.

Main Accessories
The main electrical components such as the motor controller,
contactor, power plug, emergency cut-o switch, dashboard,
accelerator, are all products of well-known foreign brands.
The emergency cut-o switch equipped for the standard
configuration complies with European safety regulations.
Electronic and hydraulic overload protection devices.
The truck has passed the CE certification.

Comfort
Owing to the low center of gravity and good stability, the
driver feels comfortable during turning.
The intelligent sensing enables buered descending.
When the fork is 100 - 60mm away from the ground, the
descending will automatically slow down, so that the
goods and pallet will not hit the ground and the goods
and ground can be protected effectively.
Silence, no pollution, energy saving and other advantages
meet environmental protection requirements.
With friendly human-computer interfaces, the new
large-screen LED instruments have good visibility and
clear readings. 

Safety
 The optional descending lock function can disable the
descending function when the driver leaves the seat,
and enable high safety.
The standard configuration provides a fork descending
buffering function. In addition, an optional electronic
control function for buffering the fork’s ascending is
provided to protect the goods from falling and damaging
the ground.
The handbrake can be optionally equipped with an alarm
buzzer to prompt the driver to pull up the handbrake
before leaving the truck.
Three horn buttons are provided, which are respectively
on the driver's steering wheel, thumb switch equipped
armrest (optional) and reverse armrest (optional), for
alerting and protecting the surrounding people.
A PIN code should be provided before entering the
system. 99 sets of PIN codes are available for the
administrator. The truck is highly secured and irrelevant
personnel cannot start the truck.

Options
Lithium packs that can be replaced quickly
Start with a PIN code or by swiping a card
Ultra-elastic solid nose tire
Environmentally-friendly colored solid tire
Left and right rearview mirrors
Reversing video
Front/rear blue lights
Rear operation lights
Cold storage truck
Reverse armrest (containing a horn button)
Fully enclosed cab
OPS seat sensing function
Fork ascending buffering
Triple multiway valve
Quadruple multiway valve
Quintuple multiway valve
Widened / heightened load backrest
Widened fork carriage
Forks of other lengths
Full free duplex mast
Full free triplex mast
Integrated side shifter
Attachments of other specifications
Grammer MSG531 suspended seat
Dedicated lithium battery charger
(Titan or Schneider)
Integrated fingertip control system including
ergonomic armrests

Standard Specification
Dual AC drive motors
High-power AC oil pump motor
Silent gear pump
Multi-function color screen instrument cluster
Large integral rubber pedal pad
Stamped iron hood, stamped iron side plates
Stamped stainless steel boarding step
Handbrake with a touch-proof mechanism
Turning deceleration function
Cloud smart module
Fork descending buering
SPE power selection
Mileage display, operating time display
Integrated fuse box
Charging muzzle meeting national standards
DC-DC converter
Electronic cooling fan
Doublet multiway valve
Emergency shut-o switch
Reversing buzzer
Traction pin
Toolbox, folder
Load sensing steering system
Standard duplex mast, fork, fork carriage and load backrest
Lithium packs with low temperature electric heating systems
The gas spring of the hood with a touch-proof mechanism
LED combination headlights, LED combination three-color
tail lights