Csm pg 2 700x466 0e63e24644

Wacker Neuson PG2


2-inch dewatering pump for clear water removal

Clear clean water from your job site or swimming pool quickly with the PG 2 dewatering pump. This simple, easy to use pump is designed to move water up to 158 gpm (600 l/min) with very little solids, up to .25-inch (6.5 mm). With its self-priming centrifugal pumping action and overall compact size, the pump is ideal for the contractor with the need for temporary water removal.

  • Cast iron impeller and volute are wear resistant for long life and minimal service.
  • Pump out vanes on back of impeller reduce debris accumulation and downtime while allowing greater productivity.
  • Carbon ceramic mechanical seal teamed with reliable four-cycle engine with low oil shutdown provides for increased operating life.
  • High strength lightweight die cast aluminum housing increases the years of trouble-free pump life. A heavy duty protective frame provides convenient carrying handles while adding extra protection for the pump


  PG2 PG2A


L x W x H  in 18.9 x 14.8 x 15.5 18.9 x 14.8 x 15.5
L x W x H Shipping in 19.9 x 15.8 x 16.7 19.9 x 15.8 x 16.7
Diameter Suction and Discharge in 2 2
Operating weight  lb 53 53
Shipping weight  lb 57 57

Operating data 

Discharge Head  ft 98 98
Discharge capacity  US gpm 158 159
Suction height Lift ft 26 25
Solids diameter Max. Size in 0.25 0.25

Engine / Motor 

Engine / Motor type  Air Cooled, Single Cylinder Air Cooled, Single Cylinder
Engine / Motor manufacturer  Wacker Neuson Honda
Engine / Motor  WM 130 GX120W1B4
Displacement  in³ 7.7 7.2
RPM / speed Max. Engine rpm 4,000 3,600
RPM / speed Operating rpm 3,600 3,600
Power Max. Rated hp 4.3 3.5
Power Rating Specification  SAE J1349 SAE J1349
Engine oil Capacity US qt 0.63 0.63
Fuel type  Gasoline Gasoline
Fuel consumption  US gal/h 0.34 0.34
Tank capacity Fuel US qt 2.8 2.6
Runtime  h 2 1.9