Csm dpu 130 p01 700x466 7cf7d79935

Wacker Neuson DPU130Le


The vibratory plate with the performance of a 7 t roller


The DPU 130 is the most powerful vibratory plate in the market. With its 130 kN centrifugal force and operating width of 120 cm, it easily reaches the productivity of a 7 t roller – but is much more cost-effective, thanks to the lower capital and operating costs. Wacker Neuson have developed this remote-controlled vibratory with its practical operation on the construction site in mind. Its pioneering design concept has won two innovation awards.

  • The unique concept of a split base plate makes maneuvering easy. There is no need for time-consuming moving backwards and forwards around obstacles and recesses.
  • The infrared remote control system provides maximum safety: The operator is protected from vibrations, noise and dust. The machine can only be operated if line of sight is intact. In case of a loss of control the proximity recognition sensor keeps the operator safe.
  • The sophisticated on-board computer offers unrivaled levels of comfort, such as use of a PIN to prevent theft, operating hour meter, temperature gauge and comprehensive diagnostic functions.
  • An overload sensor protects the machine from damage if the surface under its base plate is too hard.
  • Easy to transport: The DPU 130 can be transported easily on the back of a small truck. There is no need for a flat bed truck, as there would be for a roller.


Operating data 

Operating weight  2,613 lb
Centrifugal force  29,225 lbf
Base plate thickness  0.6 in
Height  39 in
Operating width  47 in
Frequency  58 Hz
Advance travel max. (depending on soil and environmental factors) 102 ft/min
Surface capacity max. (depending on soil and environmental factors) 24,025 ft²/h

Engine / Motor 

Engine / Motor type  Water-cooled 4-cylinder aspirated diesel engine
Engine / Motor manufacturer  Kohler
Engine / Motor  LDW 1404
Displacement  83.7 in³
at rpm  3,600 rpm
Operating performance max. (DIN ISO 3046) 32.8 hp
Operating performance (DIN ISO 3046) 21.4 hp
at rpm  2,700 rpm
Fuel consumption  1 US gal/h
Fuel tank capacity  4.8 US gal
Power transmission  Hydrostatic, electronically controlled, dual-circuit system.